Zibo Jiaxin Electric Equipment Co., Ltd.
服务热线:

13605337718

0533-7077456

Banner
Mick weight controller
Mick weight controller
Mick weight controller

In the process of producing plastic film, due to the temperature difference between day and night, the fluctuation of the grid voltage, etc., the film will be biased or lighter. Therefore, each time a piece of material is produced, several times of weight check is required to see if the weight is Within the set weight range, the traction speed is constantly corrected, so that the specified accuracy cannot be achieved. If it is heavier than the set value, it is equivalent to feeding to the customer, causing a loss; otherwise, the lighter than the set weight, the customer will say that you are cutting corners. Under this premise, Zibo Jiaxin Electric Equipment Co., Ltd. designed the Mick weight controller for the blow molding machine .

Features:

The Mick weight controller mainly solves the problem that the blow mold is heavy, light, thick and thin, and the control precision reaches 0.5% or more, which can save the quality of raw materials and stable products. The Mick weight controller is based on the manual setting of the weight per meter length (mick weight) and the bag width, bag thickness, specific gravity and the extrusion speed of the main machine. It is controlled to perform fully automatic calculation and control the traction speed to make the product reach the product. Manually set values. The device is easy to operate, as long as the bubble is pulled up according to the normal operation, the controller can be turned to the automatic position, and the controller can automatically control to reach various set values.

Previous: Film blowing machine

下一条: Mick